Lost Bottom End With HMF Duals
#11
Lost Bottom End With HMF Duals
You can richen the air screws with out taking anything apart. You just look under the airbox on the right hand side of the bike you'll be able to see the float bowls and the air screws. More than likely you'll have to richen them but you may have to play with them a bit to get them adjusted right.
#12
Lost Bottom End With HMF Duals
The best way to know if they are set right is to let the bike warm up and let it idle in neutral, then start turning one of them counterclockwise(rich) until it idle's down (rough) then simply stop and turn the other way(clockwise) 1/2 turn and you're done, do the other carb the same way........
#14
Thread
Thread Starter
Forum
Replies
Last Post
badgerboy1
Trailers, Toy Haulers, Motorhomes.
5
09-26-2017 06:11 PM
ATVC Correspondent
Drivetrain, Suspension & Tires
2
09-30-2015 01:37 AM
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)