ATVConnection.com ATV Enthusiast Community

Suzuki Discussions about Suzuki ATVs.

85 to 88 Suzuki LT230S Quadsport help.

Thread Tools
 
Search this Thread
 
Old Feb 5, 2012 | 04:40 PM
  #11281  
slider1188's Avatar
Weekend Warrior
Joined: Dec 2011
Posts: 14
Likes: 0
Default
Im going to buy a bore kit just was wondering what is best brand to buy from
 
Reply
0
Old Feb 5, 2012 | 04:48 PM
  #11282  
bigcam400's Avatar
Pro Rider
Joined: Feb 2011
Posts: 356
Likes: 0
From: stoneville nc
Default
wizeco!
 
Reply
0
Old Feb 5, 2012 | 07:12 PM
  #11283  
slider1188's Avatar
Weekend Warrior
Joined: Dec 2011
Posts: 14
Likes: 0
Default
What is the best bore kit to buy
 
Reply
0
Old Feb 5, 2012 | 07:13 PM
  #11284  
slider1188's Avatar
Weekend Warrior
Joined: Dec 2011
Posts: 14
Likes: 0
Default
Thanx
 
Reply
0
Old Feb 6, 2012 | 01:07 AM
  #11285  
270quadsportguy's Avatar
Pro Rider
Joined: Feb 2007
Posts: 356
Likes: 0
Default
Back in the day with a stock carb, I ran a 125 main and 25 pilot, With the needle on third slot. Plug burned light brown. You really have to play with the carb to get a good idle.
 
Reply
0
Old Feb 7, 2012 | 10:27 AM
  #11286  
86zuk's Avatar
Trailblazer
Joined: Apr 2010
Posts: 93
Likes: 0
From: SO ILL
Default
I just ordered new bearings for my rear axle.

Anybody got any tips, or anything specific that i need to look out for or be careful about durring installation?

Anything that would be helpful...thanks

-Scott
 
Reply
0
Old Feb 8, 2012 | 12:44 AM
  #11287  
270quadsportguy's Avatar
Pro Rider
Joined: Feb 2007
Posts: 356
Likes: 0
Default
Originally Posted by 86zuk
I just ordered new bearings for my rear axle.

Anybody got any tips, or anything specific that i need to look out for or be careful about durring installation?

Anything that would be helpful...thanks

-Scott
A long bent brass bar works well. If you can get the bearings outin one piece you will have little problems. If not ,they can be a pain. Just don't forget the spacer that goes between the bearings.
 
Reply
0
Old Feb 8, 2012 | 09:08 AM
  #11288  
Robotic's Avatar
Trailblazer
Joined: Aug 2011
Posts: 95
Likes: 0
From: California
Default
I have done swing arm bearings, bur never axle bearings.
 
Reply
0
Old Feb 9, 2012 | 11:39 PM
  #11289  
270quadsportguy's Avatar
Pro Rider
Joined: Feb 2007
Posts: 356
Likes: 0
Default
Well after four years of using my quad as a shelf, It finally lives again. But i still hate the sideways kicker!!!!! Seems all the people from back in the day moved on.
 
Reply
0
Old Feb 10, 2012 | 03:56 PM
  #11290  
Robotic's Avatar
Trailblazer
Joined: Aug 2011
Posts: 95
Likes: 0
From: California
Default
I'm missing the 5mm dowel in the camshaft, so I'm making one from the shank of a #9 drill bit. Close enough!
 
Reply
0



Advanced Search

All times are GMT -5. The time now is 02:56 AM.