hey everyone I was without my computer for a bit (lost power supply) anyway i just wanted to thank everyone here again for the old 230 ssupport. i would have naver done a complete rebuild if it wasn't for all you guys sayin how worthy of a machine it was. thought
i'd let all those that helped me know that my problem ended up being a slightly warped crankshaft. this lead to the brand new key i put on the flywheel i replaced shearing. to bad this was the last thing i looked at. the top end rebuild is complete and beautiful i must say. can't wait to ride this old boss against my friends new stuff. i am just waiting for the new crankshaft bearings and I will be riding again.
hey is settin up u'r own picture and personalizing stuff easy on this forum. i think i'll try and do that tonight

 

Does anyone know if a LT230 QuadRunner part # 14310-22A03 muffler will fit on my 86 lt230 quadsport?

Thanks

 

Im not shure mike. I would like to say yes, but the head pipe may be diffrent between the two machines. The mounting holes where it attaches to the frame should be the same. But the angle at which the muffler and headpipe meet may be diffrent. Sorry I cant be of help.
<div class="FTQUOTE"><begin quote>Originally posted by: mikem92

Does anyone know if a LT230 QuadRunner part # 14310-22A03 muffler will fit on my 86 lt230 quadsport?



Thanks</end quote></div>

 

Hay man.

Did you get the brakes working?


<div class="FTQUOTE"><begin quote>Originally posted by: jre10

<div class="FTQUOTE"><begin quote>Originally posted by: 270quadsportguy



theres 3 seats on ebay</end quote></div>



thanx for the info..i saw them and will end up purchasing one..





Good news.. the 230E started up..took awhile but it started..need to adjust the idle, it will not stay on its own..

I do have a problem with the brakes...i flushed the lines out and tried to let out all the air but now the brakes wont work, i used dot3 for brake fluid (that is recommended on 230E) the brakes were working before i did this..any solutions are greatly appreciated...</end quote></div>

 

ok well i REALLY think its time to fix up my QS its been sitting for so long now. i was wondering if you guys could help me make up a list of parts im gonna need to do the top end on it.
-piston/rings
-valves/springs/seals

i also need a new or used axle and swing arm bearings
all work will be done by myself and i was wondering how much all parts will cost and where i should get my stuff from
thanks a bunch

 

Thanks Anyway. I dont think I will buy one just yet anyway.

 

quadrunners exhaust goes out left and quadsoprt goes out on right side im bout 95% sure

 

Well you may not need it now but,
The stock part number for the muffler on the 1987 LT230SH Quadsport and the 1987 LT230EH Quadrunner are the same.
As far as I know there was no such thing as a 86 LT230E quadrunner.
But I may be wrong.

<div class="FTQUOTE"><begin quote>Originally posted by: mikem92

Thanks Anyway. I dont think I will buy one just yet anyway.</end quote></div>

 

hey qs230, I have just redone my top end and i found that the cheapest way for new motor parts is thruogh e-bay motors. there are 2 that come to mind, BIKERCHICKLTD and, ATVUNLIMITED. the bikerchick is very good at shipping the next day, the other took a few days before shippng. anyway if you go to e-bay and just search for ( lt230 motor ) you will get all the stores and compare prices yourself. I hope this helps you. 230's rule and it should be fixed.
oh and the atvunlimited store usually has all the bearings the 230 will ever need

 

thanks!