'01 Banshee carb question for the experts
#21
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Originally posted by: Sheesnojoke
After you clean them,check the pilot screws and make sure both sides are the same.Too lean on the pilot circuit will cause it to cut out at lowerspeeds.Clean the carbs,check to see if their in sync and set the mixture screrws to 2 turns out.Then slowly turn both sides in equally 1/8 at a time until its running at its best
After you clean them,check the pilot screws and make sure both sides are the same.Too lean on the pilot circuit will cause it to cut out at lowerspeeds.Clean the carbs,check to see if their in sync and set the mixture screrws to 2 turns out.Then slowly turn both sides in equally 1/8 at a time until its running at its best
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)