'01 Banshee carb question for the experts

Reply Subscribe

Thread Tools

Search this Thread

Mar 2, 2004 | 12:55 AM

#21

Audiowizard

Thread Starter

Weekend Warrior

Joined: Feb 2004

Posts: 8

Likes: 0

'01 Banshee carb question for the experts

Quote:

Originally posted by: Sheesnojoke
After you clean them,check the pilot screws and make sure both sides are the same.Too lean on the pilot circuit will cause it to cut out at lowerspeeds.Clean the carbs,check to see if their in sync and set the mixture screrws to 2 turns out.Then slowly turn both sides in equally 1/8 at a time until its running at its best

The L/S carb slide/butterfly was closed apx 3/32" more closed than the R/S! I adjusted it til it was even with the R/S and it runs like a champ! No more cutting out! That fixed the problem! I took it for some quick blasts down the street (Man this thing is a beast!)but I still need to fine tune the carb adjustments til its perfect! I appreciate all of the help from you guys! I am glad that I did't have to yank the carbs off to fix the problem, Thanks again.