ok i found a dg rcm exhaust kit on ebay for roughly $130 with free shipping, and the filters run about $30. is all of this a god deal or is there a cheaper place around.

 

I'd say go for it if they are brand new!

 

Looking to put a smaller rear sprocket and new chain on my 86 S model. Anybody know where the best place to get a 39T with a chain for a good price? Im lookin to get a little more top speed. Or, if anyone has an extra layin around that they wanted to sell, shoot me a PM.

Also, needing to change my axle bearings in the rear, gettin sloppy. how hard of a job is that? Probably ought to get that fixed before riding season gets into full swing, get a little vibration in the handle bars at high speed, i figure thats probably the problem

Thanks guys.

 

oh yea one more ?, is there a shifter for anything out there without a goofy linkage that will mate up to the 230 and be the right length to fit your foot comfortably? mine is all worn out, neutral is a pain in the a**** to find, was going to maybe buy/build a new one, but if there was something off another bike that was just a straight shaft instead of all that linkage then it would be nicer probably. if anyone knows of anything let me know, thanks

 

nvmyengine
thats a killer deal imo. a new aluminum kit is $160.

86zuk
i got a 39t from rockymountainatvmc for $20.

 

with a chain?

 

no. they have chains though. ive read a lot of different things about chains on here. some use straight roller and like them better. i use o-ring as do many others. i also heard of x-ring chains which are supposed to be the best of both worlds and the price reflects it. ive never used one but i think they sell them at rmatvmc too.

 

@86zuk

I run a generic dirtbike shifter that my mechanic ordered for me. The splines are the same and it bolted right on. I wish I could remember but I think it was an emgo product? It puts the shifter a little longer toward the front of the bike but I like it. I'll look at the box and receipt when I get home after work and give you the details.

 

yamaha blaster shifter has the right length and bend for the 230. bolt it on tight and go. i got the folding shifter on ebay for aroun $20.

 

hmm, i have an extra shifter for one of my yamaha dirtbikes, i wonder if its has the same number of teeth as the blaster... ill have to check it out