From a 500HO’s Trans to a 600/700’s Trans.
#11
From a 500HO’s Trans to a 600/700’s Trans.
Snowride: Sometimes you may be in a predicament and have no access to shovels or help and as a last resort I would do it.
Point taken and a good idea. Thanks. Have you had to do this before?
Most cases I have been too far way from an anchor point for a winch or a rope with the closest points being 75 to 100 feet away. I guess I should come up with some kind of pull pall like the trucks have.
Point taken and a good idea. Thanks. Have you had to do this before?
Most cases I have been too far way from an anchor point for a winch or a rope with the closest points being 75 to 100 feet away. I guess I should come up with some kind of pull pall like the trucks have.
#13
From a 500HO’s Trans to a 600/700’s Trans.
The 500 clutch is set to enguage very low so you bairly have to touch the throttle and it will move. So when you are idling the cluthch is enguaged a little bit, you need somthing to free it up or let it enguage later then it won't be stressing the drivetrain at idle. If you get a clutch kit or just a stiffer spring this jammed gear thing woul be gone.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)