85 to 88 Suzuki LT230S Quadsport help.
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Okay i cleaned the jets, bowl, and the floats. Put it all back together. I kept the rear plastics off because I though I should test her so I don't have to take them back off again if it doesn't work. So went to start it and it wouldn't start, then i rem to turn fuel petcock back on, thus puting fuel in the bowl. Tried her again with choke and without it several times. I came to the conclusion that the when I tried to give it gas it died right away, though it would idle. Its still idleing a bit fast but nothing like the other day. My question is what did I do wrong and why is it not working correctly???
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
For the idle Sounds like the choke may not be closing all the way. I would also look at the jets and clean the ends out with some thing small. I had some of the same things going on with my lt230s a small wire around the end of the jets along with a little carb cleaner and she runs great. I uesed a few strands off the end of a 18 Gauge copper Wire i had in the shop. You don't need much and you don't want to bore the jets out you just want to clean the end of any build up.
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
For the idle Sounds like the choke may not be closing all the way. I would also look at the jets and clean the ends out with some thing small. I had some of the same things going on with my lt230s a small wire around the end of the jets along with a little carb cleaner and she runs great. I uesed a few strands off the end of a 18 Gauge copper Wire i had in the shop. You don't need much and you don't want to bore the jets out you just want to clean the end of any build up.