85 to 88 Suzuki LT230S Quadsport help.
#8491
01-26-2010, 02:08 AM
Pro Rider
i found a Durablue axle on ebay. dont really have that kind of cash at the moment. think i might go with a stock 86 250r 24spline axle for $50 bucks. which according to a different thread should give me 1.5 inches on each side plus the new rims +6 +3. the only other thing i cant figure out is if a +4 +2 front offset is better than a +3 +2 offset. and what is bump steer? i am still foggy as to what that means. need lots of help with this rebuild, i was hit by a drunk driver New Years Eve
. All that i have left of my original 230 is the motor. so i need access to lots of cheap but good parts( plastics too).plus i am working with 2 questionable frames. thanks for any help.
#8492
01-26-2010, 12:29 PM
Pro Rider
i found a Durablue axle on ebay. dont really have that kind of cash at the moment. think i might go with a stock 86 250r 24spline axle for $50 bucks. which according to a different thread should give me 1.5 inches on each side plus the new rims +6 +3. the only other thing i cant figure out is if a +4 +2 front offset is better than a +3 +2 offset. and what is bump steer? i am still foggy as to what that means. need lots of help with this rebuild, i was hit by a drunk driver New Years Eve who was driving a rhino. All that i have left of my original 230 is the motor. so i need access to lots of cheap but good parts( plastics too).plus i am working with 2 questionable frames. thanks for any help.
who was driving a rhino. All that i have left of my original 230 is the motor. so i need access to lots of cheap but good parts( plastics too).plus i am working with 2 questionable frames. thanks for any help.
#8493
01-26-2010, 04:08 PM
Pro Rider
#8494
01-26-2010, 07:57 PM
Pro Rider
Join Date: Feb 2008
Location: NJ
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know if a 250r axle will fit my current axle carrier? and thanks for the info on the frame issue. i welded a washer on the inside and outside. and i did warp the frame, i accidentally pushed the brake side out about an 1/8th inch and wasn't sure if it could be bent back. and also what is the difference between a 10x6 and a 10x5 front rim?
#8495
01-26-2010, 07:59 PM
Pro Rider
Join Date: Feb 2008
Location: NJ
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
very tough to say what's causing it. my clutch would bark like crazy and make other various scary sounds that shouldnt come from a clutch whenever i'd run amsoil in it. i switched to cheapo walmart sf grade oil and its perfect. although, thats just my situation, you may have a more serious mechanical issue.
#8496
01-27-2010, 03:23 PM
Pro Rider
Join Date: Aug 2007
Location: Minnesota
Posts: 2,071
Likes: 0
Received 0 Likes
on
0 Posts
#8497
01-29-2010, 10:31 PM
Would this thing work on a 230?
lt250r lt 250r Suzuki quadracer axle aftermarket : eBay Motors (item 270522250664 end time Feb-01-10 16:11:49 PST)
lt250r lt 250r Suzuki quadracer axle aftermarket : eBay Motors (item 270522250664 end time Feb-01-10 16:11:49 PST)
#8498
01-29-2010, 11:24 PM
Pro Rider
#8500
01-30-2010, 05:36 PM
Pro Rider
Join Date: Feb 2008
Location: NJ
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
correct. and regarding your link bashr52, yes it should work. however, that guy's description is wrong. there is no way he can include 4 *OR* 5 lug hubs that will fit that axle. all 24 spline axles are 4 bolt, and all 26 spline axles are 5. therefore, if that axle actually is 24 spline, it should only fit 85-87.5, not 85-92 like he said.
not that it really matters haha
not that it really matters haha